| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE, ISO14001:2004 |
| Wall Thickness: | 5-22mm |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hot Dip Galvanized water tank
Hot Dip Galvanized water tank is molded by Q235 steel plate, water tank panels can be 2000*1000mm, 2000*500mm, 1500*1000mm, 1500*500mm, 1220*1220mm, 1000*1000mm, 1000*500mm, 500*500mm etc, it's suitable for storage of building water supply, regulating water tank, expansion of heating system, condensate tank and construction, geological reconnaissance, industrial & national defense etc, water storage capacity is 1-3000 cubic meters, height upto 6 meters. HDG water tanks be widely used for rainwater collection, fire-fighting water storage, irrigation water storage etc.
| Tank height (mm) | Panel thickness (mm) | |||||
| Bottom | Side1 | Side2 | Side3 | Side4 | roof | |
| 1000 | 3 | 3 | 2 | |||
| 1500 | 3 | 3 | 3 | |||
| 2000 | 3 | 3 | 3 | |||
| 2500 | 3 | 4 | 3 | 3 | ||
| 3000 | 3 | 4 | 3 | 3 | ||
| 3500 | 3 | 4 | 3 | 3 | 2.5 | |
| 4000 | 3 | 5 | 4 | 3 | 2.5 | |
|
Type
|
1.22m(h)
|
2.44m(h)
|
3.66m(h)
|
4.88m(h)
|
|
4th side pannels
|
|
|
|
5mm
|
|
3rd side panels
|
|
|
|
5mm
|
|
2nd side panels
|
|
|
|
5mm
|
|
1st side panels
|
5mm
|
5mm
|
5mm
|
5mm
|
|
Bottom panels
|
5mm
|
5mm
|
5mm
|
5mm
|
|
Type
|
1.0m(H)
|
2.0m(H)
|
3.0m(H)
|
4.0m(H)
|
5.0m(H)
|
|
5th side panels
|
|
|
|
|
5mm
|
|
4th side panels
|
|
|
|
5mm
|
5mm
|
|
3rd side panels
|
|
|
5mm
|
5mm
|
5mm
|
|
2nd side panels
|
|
5mm
|
5mm
|
5mm
|
5mm
|
|
1st side panels
|
5mm
|
5mm
|
5mm
|
5mm
|
5mm
|
|
Bottom panels
|
5mm
|
5mm
|
5mm
|
5mm
|
5mm
|
1. Material
The sectional panel tank shall consist of 4' x 4' or 1 meter x 1 meter,1 meter x 0.5 meter panel manufactured from 1.5mm to 4.0mm thickness according to requirement.
2. Flanges
The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.
3. Reinforcement Method
All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water. The Top panel is supported by top panel support, which shall be made of stainless steel grade 304 or 316 material according to requirement.
4. Accessories
1. Bolt. nut & washers stainless steel 304 material.
2. Sealing material Non-toxic P.V.C foam tape shall be used in between the joints.
3. Covers The tank cover shall be constructed from 1.2mm to 3.0mm of thickness stainless steel 304 material according to the requirement.
4. Ladders and Level Indicator
Internal & external ladder shall be made of stainless steel grade 304 material.
){kind=link}