Wholesale High Quality Efficient FRP Rebar Machine for Construction and Industry

Product Description

 

Product Description

FRP Rebar Machine Technical Information
     The machine is mainly used to produce FRP Rebar of various specifications. The machine can automatically complete slitting, impregnation, performing, winding, heating and curing, traction, fixed-length cutting, and collection and stacking.

I. Structure principle
This unit mainly consists of a yarn frame, dipping tank, winding, oven, traction machine, cutting saw and stacking device.
1, Yarn frame: placing yarn mass, using steel plate, steel pipe, and angle steel welded structure.
2, Dipping tank: welded with stainless steel material, with a pressure roller inside to make the roving fully impregnated in resin.
3, Winding device: Adopt a gear drive to drive the thread roller to rotate around the product and wind out the thread. Adopt frequency conversion speed control mode, the speed is stepless adjusted.
4, Winding device: Adopt gear drive to push down the winding tape wound on top of the FRP bar to form the thread Adopt frequency conversion speed control mode, the speed is steplessly adjusted.
5, Oven: Adopt a stainless steel tube heater and intelligent temperature control instrument to control temperature. The heater box adopts a split structure, which can be easily opened to clean up the dripping resin and filled with heat insulation and heat preservation material inside.
6, Automatic tracking cutting saw: It can cut the FRP bars on the production line online at a fixed length according to specific requirements.
7, Product stacking device: fiberglass reinforcement is stacked after cutting taken away, and yarded by production staff.

 

Diameter(mm)	Area (mm²)	UTF (KN)	Screw UTF (KN)	UTS(MPa)	Shearing strength	Elastic modulus	Elongation rate
20	254	220	60	700	150	≥40	≥1.8
22	314	250	60	700
24	379	290	70	700			≥1.5
25	415	320	70	700
28	531	420	80	700
32	707	550	80	700
36	907	600	100	600

 

The FRP Rebar manufacture equipment is developed by our own. it has low energy consumption gives stable product quality can produce fully threaded fiberglass anchor rods and fiberglass rebar. We can supply the Rebar manufacture equipment and are also responsible for the installation and commissioning, as well as technical services in the later stage!

 

Certifications

 

 

GFRP rebar has the advantages of high strength, durability, and lightweight. We use the GFRP rebar shield enclosure, instead of the steel rebar to ensure structural stability and to make it unnecessary to break the tunnel portal manually when the shield starts or arrives at the construction site as well. It can reduce the safety risk of shield construction. And because of its high tensile strength, low shear strength, and brittle failure, the shield cutter can easily cut the GFRP rebar into small sections and discharge it through the sludge discharge pipe.

Company Profile